Maximum Part Size

400 × 250 × 250 mm

Minimum Part Size

4 × 4 × 4 mm

General Tolerance

0.8%

Depending on the part’s size and geometry, parts may shrink 0.8% – 2.5% after processing. Xometry does not guarantee tolerances on the first order of a new design.

Minimum Feature Size

1 mm

• Capability: 1.0 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Minimal wall thickness (Supported)

1 mm

• Capability: 1 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Minimal wall thickness (Unsupported)

1 mm

• Capability: 1 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Maximum Wall Thickness

5 mm

Minimum Gap Between Walls

1 mm

• Capability: 1 mm
• Recommendation: 1.5 mm

• Capability: 0.040″
• Recommendation: 0.060″

Minimum Hole Diameter at 1mm Thickness

1 mm

• Capability: 1 mm
• Recommendation: 1.5 mm

• Capability: 0.040″
• Recommendation: 0.060″

Minimum Shaft Diameter at 1mm Height

1 mm

• Capability: 1 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Minimum Embossed Text Height

0.5 mm

Embossed text shallower than 0.5 mm may be unclear.

Embossed text shallower than 0.020” may be unclear.

Minimum Debossed Text Depth

0.5 mm

Debossed text shallower than 0.5 mm may be unclear.

Debossed text shallower than 0.020” may be unclear.

Minimum Font Size (Character Height)

3.5 mm

• Capability: 3.5 mm
• Recommendation: 5 mm

• Capability: 0.138″
• Recommendation: 0.197″

Requires Support Structures

No

Horizontal Bridges, Maximum Unsupported Length

N/A

This process does not require support structures.

This process does not require support structures.

Maximum Unsupported Overhang Size

N/A

This process does not require support structures.

This process does not require support structures.

Unsupported Angle from Vertical

N/A

This process does not require support structures.

Minimum Clearance for Moving Parts

0.5 mm

Clearances smaller than 0.5 mm may result in fused parts.

Clearances smaller than 0.020” may result in fused parts.

Standard Layer Thickness

0.1-0.004 mm

Infill Options

Solid