Xometry.pro
en – EU
Knowledge & Community
Search
K
Quote & source your parts
Europe Europe
English Deutsch Français Italiano Español
Türkiye Türkiye
English Türkçe
United Kingdom United Kingdom
English
Global Global
English
select
navigate
switch tabs
Esc close

Get Instant Quote

Use our Instant Quoting Engine to easily quote and source your parts online

Get a Quote
Back
 Profile
Menu
Materials Library
Manufacturing Stories & Cases
Articles
E-Books & Guides
Free Tools
Webinars
Free Courses
Community Discussions
Create Topic
Quote & Source Your Parts
Get a Quote

Edit topic

Home Xometry Community Industrial Design Tapping threads – DMLS parts

Tapping threads - DMLS parts

0
J
2

Hey everyone,

I’m working on a DMLS project and need to tap M10 threads into the part. Can anyone recommend the best/most cost-efficient design strategies for this? Here are my considerations:

  • Creating an 8.5 mm diameter vertical hole and relying on the precision of DMLS.
  • Creating a smaller hole (e.g., 6 mm), letting it be printed, and then drilling it out to 8.5 mm for more precision.
  • Not designing a hole at all and having it CNC drilled to 8.5 mm after the part is ready.

Any experiences or advice would be greatly appreciated!

Link copied
Solved by Greg Paulsen

Great question. DMLS is precise enough that if you build the hole to the standard drill size, it can be directly tapped during post-processing. In this case, M10 threads would require an 8.5 mm hole. If this is a blind hole, please make sure that you have extra room for the tap to engage into the threads since the taps have a taper at the tip. I like to add 3-4 pitches of additional clearance at the bottom of my blind hole if possible to make sure threads are cut cleanly to my desired thread depth.

    • J

      Hey everyone,

      I’m working on a DMLS project and need to tap M10 threads into the part. Can anyone recommend the best/most cost-efficient design strategies for this? Here are my considerations:

      • Creating an 8.5 mm diameter vertical hole and relying on the precision of DMLS.
      • Creating a smaller hole (e.g., 6 mm), letting it be printed, and then drilling it out to 8.5 mm for more precision.
      • Not designing a hole at all and having it CNC drilled to 8.5 mm after the part is ready.

      Any experiences or advice would be greatly appreciated!

      0
      Reply
    • Xometry Engineer

      Great question. DMLS is precise enough that if you build the hole to the standard drill size, it can be directly tapped during post-processing. In this case, M10 threads would require an 8.5 mm hole. If this is a blind hole, please make sure that you have extra room for the tap to engage into the threads since the taps have a taper at the tip. I like to add 3-4 pitches of additional clearance at the bottom of my blind hole if possible to make sure threads are cut cleanly to my desired thread depth.

      0
      Reply
      Link copied
      • J
        Greg Paulsen

        Many thanks!

        0
        Reply
        Link copied
Tapping threads – DMLS parts
Your information:




Suggested Topics

Topic
Replies
Views
Activity
SLA wall thickness issue for microfluidic channels
Industrial Design
Hi, I created a 3D design for a small microfluidic part using SLA (Clear Resin) with internal channels ~0.4 mm wide and wall thickness around 0.5 mm. The function relies on optical inspection through... read more
B
c
1
21
Jul 29
Embossed vs. engraved text for outdoor molded parts
Industrial Design
Hi there, I need to add a part number and recycling symbol on the surface of molded parts in PP GF20 for outdoor use. I initially planned to use engraved text for aesthetic reasons,... read more
T
R
A
2
31
Jul 30
Minimum hole diameter vs sheet thickness 316L
Industrial Design
Hello, I would like to produce a stainless steel 316L bracket, 3 mm thick, cut by fiber laser. I need to include several small holes for drainage and fastening, and I’ve heard there might... read more
F
A
2
45
Jul 28
Ejector pin placement near snap-fit
Industrial Design
I’m working on a small injection-molded housing for an automotive sensor, using PA6 GF30. There are two snap-fit arms inside (cantilever type), about 2 mm-thick walls. I’m not sure where to place the ejector... read more
M
T
5
115
Jul 18
Adding countersinks to formed stainless sheet metal
Industrial Design
Hello, I'm working on a sheet metal enclosure (as in the image) that requires flush mounting for M6 countersunk screws. I need to add a countersink on a few holes, but the part is... read more
D
M
D
2
126
Jul 03

Edit topic