Xometry.pro
en – EU
Knowledge & Community
Search
K
Quote & source your parts
Europe Europe
English Deutsch Français Italiano Español
Türkiye Türkiye
English Türkçe
United Kingdom United Kingdom
English
Global Global
English
select
navigate
switch tabs
Esc close

Get Instant Quote

Use our Instant Quoting Engine to easily quote and source your parts online

Get a Quote
Back
 Profile
Menu
Materials Library
Manufacturing Stories & Cases
Articles
E-Books & Guides
Free Tools
Webinars
Free Courses
Community Discussions
Create Topic
Quote & Source Your Parts
Get a Quote

Edit topic

Home Xometry Community Manufacturing Impact of FDM Layer Thickness on Strength

Impact of FDM Layer Thickness on Strength

0
P
2

Hello! I am currently designing a high-load component for industrial plants using a high-strength polymer such as Ultem 1010 or PC (FDM printing). The component must withstand significant stress and impact.

I’m wavering between a layer thickness of 0.1 mm and 0.2 mm. I know that a smaller layer thickness can affect the mechanical properties, but I’m worried that at a layer thickness of 0.3 mm, small particles/industrial dust might get between the layers, which could affect the long-term durability.

Does anyone have experience with how different layer thicknesses affect the compressive strength, tensile strength, and impact toughness? Which layer thickness would you recommend?

Thank you!

Peter

Automatically translated from: Deutsch
See original
Link copied
Solved by Nikolaus Mroncz

Hello Peter,

thank you for your question and please excuse the delay.

In fact, a higher layer thickness leads to higher strength, but of course then brings the disadvantage of a worse surface.

Infill also plays a role here and should not be too sparse for higher strength (50%+).

In your case, I would choose a layer thickness of 0.2mm.

Experiments have shown that the actual difference is also relatively minor.

VG

Niko

    • P
      Hello! I am currently designing a high-load component for industrial plants using a high-strength polymer such as Ultem 1010 or PC (FDM printing). The component must withstand significant stress and impact.

      I’m wavering between a layer thickness of 0.1 mm and 0.2 mm. I know that a smaller layer thickness can affect the mechanical properties, but I’m worried that at a layer thickness of 0.3 mm, small particles/industrial dust might get between the layers, which could affect the long-term durability.

      Does anyone have experience with how different layer thicknesses affect the compressive strength, tensile strength, and impact toughness? Which layer thickness would you recommend?

      Thank you!

      Peter

      Automatically translated from: Deutsch

      See original
      0
      Reply
    • Xometry Engineer

      Hello Peter,

      thank you for your question and please excuse the delay.

      In fact, a higher layer thickness leads to higher strength, but of course then brings the disadvantage of a worse surface.

      Infill also plays a role here and should not be too sparse for higher strength (50%+).

      In your case, I would choose a layer thickness of 0.2mm.

      Experiments have shown that the actual difference is also relatively minor.

      VG

      Niko

      0
      Reply
      Link copied
      • P
        Nikolaus Mroncz

        All clear

        Thank you very much!

        0
        Reply
        Link copied
Impact of FDM Layer Thickness on Strength
Your information:




Suggested Topics

Topic
Replies
Views
Activity
Issues with polyurethane bonded rollers under load
Manufacturing
Hi! Currently working on a small batch of U-groove guide rollers for a linear transfer system, and I'm using a soft polyurethane tread (around 85A Shore) bonded to aluminum hubs. The supplier estimates each... read more
P
A
4
20
Aug 19
Best fixture setup for milling and drilling mid-size batches of aluminum brackets?
Manufacturing
Hi, I've got a batch of aluminum brackets that need to be drilled and milled on all sides with high repeatability. Has anyone designed a modular fixture system for parts like this to reduce... read more
h
a
4
32
Aug 14
Vacuum casting for snap-fits
Manufacturing
I’m planning to use vacuum casting to produce about 50 housing units with integrated snap-fit features for an electronics prototype. The parts need to survive multiple assembly/disassembly cycles during testing. I’ve seen mixed opinions... read more
J
A
j
9
67
Aug 11
Choosing the Right Material for Injection Molding – What’s Your Go-To?
Manufacturing
Hey everyone! I’m working on a few small-batch parts and weighing my options when it comes to materials for injection molding. I've used ABS and polypropylene in the past, but I'm curious—what materials do... read more
0
93
Jul 18
Feasibility of sharp internal corners in CNC-machined
Manufacturing
I'm about to place a CNC machining order for a small ABS housing with some detailed features, but I’m unsure if the internal recess can be manufactured as designed. The model includes sharp internal... read more
J
e
M
2
150
Jul 09

Edit topic