select
navigate
switch tabs
Esc close

Upgrade from Renault Master 4x2 to 4x4

0
1

Hello, I need urgent information on how I can get support regarding the upgrade of the 9 Renault Master vehicles we currently have from 4×2 to 4×4. The supply of all 4 X 4 kits may be possible or the production of certain parts may be possible. If I am contacted urgently regarding this issue, we can meet to discuss the purchase or production of the kits. The situation is urgent. Ersan Uymaz 0533 294 87 91 Istanbul Turkey

Automatically translated from: Türkçe
See original
Solved by Sinem Çiftçi

Hello Mr. Ersan Uymaz,

Thank you for contacting us at Xometry. Our platform does not allow the purchase of standard products, but we can meet your specific manufacturing needs via our digital platform. If you have a 3D model or technical drawings ready, we can assist you with the production.

From what we understand from your question, it appears that a professional design, additional licensing, and product development processes are required for the physical conversion of the vehicle. Unfortunately, we cannot assist with this. To explain your request in detail, please send an email to info@xometry.com.tr. From what I can see on the system, you have already contacted us via email and have been directed to the relevant account manager. Our sales team can provide the most accurate information and explain how we can assist you based on your needs.

If we can assist with anything else, please feel free to contact us, we wish you a good day.

    • Hello, I need urgent information on how I can get support regarding the upgrade of the 9 Renault Master vehicles we currently have from 4×2 to 4×4. The supply of all 4 X 4 kits may be possible or the production of certain parts may be possible. If I am contacted urgently regarding this issue, we can meet to discuss the purchase or production of the kits. The situation is urgent. Ersan Uymaz 0533 294 87 91 Istanbul Turkey
      Automatically translated from: Türkçe

      See original
      0
    • S

      Hello Mr. Ersan Uymaz,

      Thank you for contacting us at Xometry. Our platform does not allow the purchase of standard products, but we can meet your specific manufacturing needs via our digital platform. If you have a 3D model or technical drawings ready, we can assist you with the production.

      From what we understand from your question, it appears that a professional design, additional licensing, and product development processes are required for the physical conversion of the vehicle. Unfortunately, we cannot assist with this. To explain your request in detail, please send an email to info@xometry.com.tr. From what I can see on the system, you have already contacted us via email and have been directed to the relevant account manager. Our sales team can provide the most accurate information and explain how we can assist you based on your needs.

      If we can assist with anything else, please feel free to contact us, we wish you a good day.

      0
      Reply
Upgrade from Renault Master 4×2 to 4×4
Your information:




Cancel

Suggested Topics

Topic
Replies
Views
Activity
Issues with polyurethane bonded rollers under load
Hi! Currently working on a small batch of U-groove guide rollers for a linear transfer system, and I'm using a soft polyurethane tread (around 85A Shore) bonded to aluminum hubs. The supplier estimates each... read more
P
A
4
24
Aug 19
Best fixture setup for milling and drilling mid-size batches of aluminum brackets?
Hi, I've got a batch of aluminum brackets that need to be drilled and milled on all sides with high repeatability. Has anyone designed a modular fixture system for parts like this to reduce... read more
h
a
4
36
Aug 14
Vacuum casting for snap-fits
I’m planning to use vacuum casting to produce about 50 housing units with integrated snap-fit features for an electronics prototype. The parts need to survive multiple assembly/disassembly cycles during testing. I’ve seen mixed opinions... read more
J
A
j
9
70
Aug 11
Choosing the Right Material for Injection Molding – What’s Your Go-To?
Hey everyone! I’m working on a few small-batch parts and weighing my options when it comes to materials for injection molding. I've used ABS and polypropylene in the past, but I'm curious—what materials do... read more
0
94
Jul 18
Feasibility of sharp internal corners in CNC-machined
I'm about to place a CNC machining order for a small ABS housing with some detailed features, but I’m unsure if the internal recess can be manufactured as designed. The model includes sharp internal... read more
J
e
M
2
153
Jul 09