select
navigate
switch tabs
Esc close

Finish options for nylon in 3D printing

0
1

What surface finish options are available for 3D printed parts made from nylon?

Solved by Nikolaus Mroncz
There are two types of surface finishes available for parts printed with nylon (with either SLS or MJF technologies):
  • Post-processing operations that aim to smooth the surface of the parts, for example, vapour smoothing, bead blasting or media tumbling
  • Colour finishes to better customize the parts, like dyeing and spray painting
Both categories are mostly applied for aesthetic purposes. We have a detailed overview of surface finishes for 3D printing on the website, as well as a page dedicated to Nylon PA 12: https://xometry.pro/en-eu/articles/3d-printing-finishes/ https://xometry.pro/en-eu/materials/nylon-pa-12/
    • What surface finish options are available for 3D printed parts made from nylon?

      0
    • Xometry Engineer

      There are two types of surface finishes available for parts printed with nylon (with either SLS or MJF technologies):

      • Post-processing operations that aim to smooth the surface of the parts, for example, vapour smoothing, bead blasting or media tumbling
      • Colour finishes to better customize the parts, like dyeing and spray painting

      Both categories are mostly applied for aesthetic purposes. We have a detailed overview of surface finishes for 3D printing on the website, as well as a page dedicated to Nylon PA 12:

      Surface Finishes for 3D Printing

      Nylon 12 / PA 12 (SLS, MJF)

      0
      Reply
Finish options for nylon in 3D printing
Your information:




Suggested Topics

Topic
Replies
Views
Activity
Steel Advice
HelloI would like to request a quote for cold cutting tools (no temperature problems). I usually work with high-speed steels, for their hardness and the relative ease of re-sharpening, but none is offered in... read more
m
P
1
24
Apr 30
Fuel-resistant material for 3D printing
Hi! I'm restoring an older two-stroke motorcycle and need to replace a worn-out venturi nozzle that draws in fuel-air mix. I’m considering having it 3D printed, but I’m unsure which material would best hold... read more
A
M
1
25
May 02
MJF material with the best low-temp resistance
Hello, I need to produce a small housing component for an outdoor sensor unit. I thought MJF could be a good fit for prototyping and potentially low-volume production. The part needs to handle exposure... read more
J
1
76
Apr 15
Best material for vibration-dampers fan spacers
Help, I need to reduce vibrations transmitted to the enclosure and improve airflow efficiency for 3D-printed spacers for mounting cooling fans on an industrial control cabinet. These spacers need to provide some damping without... read more
Y
C
2
151
Mar 20
Coated fasteners for stainless steel in coastal environments
We need to create a stainless steel structure for outdoor use in a coastal environment, and corrosion is our primary concern. We're considering coated fasteners but need to understand whether thicker coatings provide adequate... read more
M
C
1
127
Mar 18