SLA Printing: Is manufacturing a large soft robot possible?

0

M

Max Schulz

12 July 2024 at 12:10

2

Hello! I’m planning to manufacture a soft robot from flexible material, either silicone or Formlabs Flexible 50A Resin, with dimensions of approximately 45 cm in width, 30 cm in depth, and 30 cm in height. Could this be achieved within the scope of flexible SLA printing? What are the maximum dimensions possible for flexible SLA printing?

Automatically translated from: Deutsch

See original

Link copied

Reply

• • M

    Max Schulz

    12 July 2024 at 12:10

    Hello! I’m planning to manufacture a soft robot from flexible material, either silicone or Formlabs Flexible 50A Resin, with dimensions of approximately 45 cm in width, 30 cm in depth, and 30 cm in height. Could this be achieved within the scope of flexible SLA printing? What are the maximum dimensions possible for flexible SLA printing?

    Automatically translated from: Deutsch

    See original

    0

    Reply
  • 

    Nikolaus Mroncz

    15 July 2024 at 12:35

    Xometry Engineer

    Hello Max,

    unfortunately, it’s not possible to represent such large parts with flexible materials like Flexible 50A. The material is suitable for the machines Form 3 and Form 4. Form 4 is the larger one and measures 200x125x210mm, which I also see as the maximum. VG

    0

    Reply

    Link copied

    
    • M

      Max Schulz

      16 July 2024 at 11:44

      Nikolaus Mroncz

      Hi Nikolaus, thank you so much for the quick response and clear information! This really helps me in planning my project. Great that you took the time to explain it in such detail. Best regards
      Max

      0

      Reply

      Link copied