Xometry.pro
en – Global
Knowledge & Community
Search
K
Quote & source your parts
Europe Europe
English Deutsch Français Italiano
Türkiye Türkiye
English
United Kingdom United Kingdom
English
Global Global
English
select
navigate
switch tabs
Esc close

Get Instant Quote

Use our Instant Quoting Engine to easily quote and source your parts online

Get a Quote
Back
 Profile
Menu
Materials Library
Manufacturing Stories & Cases
Articles
E-books & Guides
Free Tools
Webinars
Free Courses
Community Discussions
Create Topic
Quote & Source Your Parts
Get a Quote

Create a new Topic

Home Materials Library PPE-PS

PPE-PS

  • Alternative Designations: Polyphenylene ether – Polystyrene
Get an instant quote
Price range:
€€€€€

Description:

This polymer is a blend of polyphenylene ether and polystyrene. It is highly ductile and exhibits good resistance to impact and good surface appearance. It has low moisture absorption and is dimensionally stable. Its tensile strength ranges from 50 MPa at room temperature. It is typically used for valve components, water pumps and medical devices.

 

Material Properties

Processes:

Special properties

  • Impact resistance
PropertyValue, metricValue, ImperialType
Density1.12 g/cm31.12 g/cm3-
Elongation at Break30%30%-
Hardness8989Shore D
Ultimate Tensile Strength50 MPa7 ksi-
Download datasheet
  • Injection moulding SPI surface finishes Injection moulding SPI surface finishes
    Injection Moulding SPI Finishes Injection Moulding SPI Finishes

    SPI

    SPI finishes are a set of standard mould finishes with different polished textures for enhanced properties.

    Notes:

    A1, A2, A3, B1, B2, B3, C1, C2, C3, D1, D2, D3

    Final result:

    • Heavily polished, to semi-gloss to fine and coarse matte depending on the selection
  • Injection moulding VDI surface finishes Injection moulding VDI surface finishes
    Injection moulding VDI surface finishes Injection moulding VDI surface finishes

    VDI

    VDI is an international standard for mould texturing of matte surfaces. It is mainly processed by Electrical Discharge Machining (EDM) when mould machining.

    Notes:

    VDI12, VDI15, VDI18,VDI21, VDI 24, VDI27, VDI30, VDI33, VDI36, VDI39, VDI42, VDI45

    Final result:

    • Fine-to-coarse grain depending on the selection
  • Custom finish icon

    Custom Finishing

    If you select a custom finish in the Instant Quoting Engine it will require manual review. Manual quoting usually takes 1-2 business days.

    Notes:

    Submitting for manual review with a custom request does not guarantee a quote.