Maximum Part Size

119 × 189 × 300 mm

• Capability: 119 x 189 x 300 mm
• Recommendation: 100 x 100 x 150 mm

• Capability: 4.7″ x 11.8″ x 7.4″
• Recommendation: 3.9″ x 3.9″ x 4.5″

Minimum Part Size

3 × 2 × 1 mm

General Tolerance

0.1%

±0.1% (±0.1 mm). However, tolerances are not guaranteed on the first attempt at a new design.

Minimum Feature Size

0.5 mm

• Capability: 0.5 mm
• Recommendation: 1.0 mm

• Capability: 0.020″
• Recommendation: 0.040″

Minimal wall thickness (Supported)

1 mm

Recommendation: 1 mm

Recommendation: 0.040″

Minimal wall thickness (Unsupported)

1 mm

Recommendation: 1 mm

Recommendation: 0.040″

Maximum Wall Thickness

5 mm

Minimum Gap Between Walls

0.3 mm

• Capability: 0.3 mm
• Recommendation: 1 mm

• Capability: 0.012″
• Recommendation: 0.040″

Minimum Hole Diameter at 1mm Thickness

0.4 mm

• Capability: 0.4 mm
• Recommendation: 1 mm

• Capability: 0.016″
• Recommendation: 0.040″

Minimum Shaft Diameter at 1mm Height

0.3 mm

• Capability: 0.3 mm
• Recommendation: 0.5 mm

• Capability: 0.012″
• Recommendation: 0.020″

Minimum Embossed Text Height

0.5 mm

Embossed text shallower than 0.5 mm may be unclear.

Embossed text shallower than 0.020” may be unclear.

Minimum Debossed Text Depth

0.5 mm

Debossed text shallower than 0.5 mm may be unclear.

Debossed text shallower than 0.020” may be unclear.

Minimum Font Size (Character Height)

1 mm

• Capability: 1 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Requires Support Structures

Yes

Horizontal Bridges, Maximum Unsupported Length

4 mm

2-4 mm. Varies depending on material.

0.080-0.157″ . Varies depending on material.

Maximum Unsupported Overhang Size

2 mm

• May vary depending on material.
• Generally, overhangs longer than 2 mm should be supported even if their width is less than 2 mm

• May vary depending on material.
• Generally, overhangs longer than 0.080″ should be supported even if their width is less than 0.080″

Unsupported Angle from Vertical

40°

Minimum Clearance for Moving Parts

0.5 mm

Standard Layer Thickness

0.1 mm

Infill Options

Solid