Maximum Part Size

700 × 380.0 × 580.0 mm

• Capability: 700 x 380 x 580 mm
• Recommendation: 320 x 320 x 580 mm

• Capability: 27.6″ x 15.0″ x 22.8″
• Recommendation: 12.6″ x 12.6″ x 22.8″

Minimum Part Size

12.7 × 7.5 × 2.54 mm

General Tolerance

0.3%

±0.3% (± 0.3 mm)

Minimum Feature Size

0.5 mm

• Capability: 0.5 mm
• Recommendation: 1 mm

• Capability: 0.020″
• Recommendation: 0.040″

Minimal wall thickness (Supported)

0.5 mm

• Capability: 0.5 mm
• Recommendation: 1.5 mm

• Capability: 0.020″
• Recommendation: 0.060″

Minimal wall thickness (Unsupported)

0.6 mm

• Capability: 0.6 mm
• Recommendation: 1.5 mm

• Capability: 0.024″
• Recommendation: 0.060″

Maximum Wall Thickness

7 mm

Minimum Gap Between Walls

0.50 mm

• Capability: 0.5 mm
• Recommendation: 1 mm

• Capability: 0.020″
• Recommendation: 0.040″

Minimum Hole Diameter at 1mm Thickness

0.8 mm

• Capability: 0.8 mm
• Recommendation: 1.5 mm

• Capability: 0.031″
• Recommendation: 0.060″

Minimum Shaft Diameter at 1mm Height

0.6 mm

• Capability: 0.6 mm
• Recommendation: 1.5 mm

• Capability: 0.024″
• Recommendation: 0.060″

Minimum Embossed Text Height

1 mm

Text depth can exceed 1 mm; however, the greater the depth, the more
challenging it becomes to remove powder from the crevices of the text.

Text depth can exceed 0.040” however, the greater the depth, the more challenging it becomes to remove powder from the crevices of the text.

Minimum Debossed Text Depth

0.5 mm

Debossed text shallower than 0.5 mm may be unclear.

Debossed text shallower than 0.020″ may be unclear.

Minimum Font Size (Character Height)

2.1 mm

• Capability: 2.1 mm
• Recommendation: 5 mm

• Capability: 0.083″
• Recommendation: 0.197″

Requires Support Structures

No

Horizontal Bridges, Maximum Unsupported Length

N/A

This process does not require support structures.

This process does not require support structures.

Maximum Unsupported Overhang Size

N/A

This process does not require support structures.

This process does not require support structures.

Unsupported Angle from Vertical

N/A

This process does not require support structures.

Minimum Clearance for Moving Parts

0.7 mm

Clearances smaller than 0.5 mm may result in fused parts.

Clearances smaller than 0.020″ may result in fused parts.

Standard Layer Thickness

0.1-0.12 mm

Layer height is typical for the process and standard material selection.

Layer height is typical for the process and standard material selection.

Infill Options

Solid