Maximum Part Size

900 × 600 × 900 mm

• Standard: 350 x 350 x 350 mm
• Industrial: 900 x 600 x 900 mm

• Standard: 13.8″ x 13.8″ x 13.8″
• Industrial: 35.4″ x 35.4″ x 23.6″

Minimum Part Size

5 × 5 × 0.75 mm

General Tolerance

0.5%

±0.5% (±0.5 mm) (Standard & Industrial)

Minimum Feature Size

1.2 mm

• Capability: 1.2 mm
• Recommendation: 1.5 mm

• Capability: 0.047“
• Recommendation: 0.060“

Minimal wall thickness (Supported)

0.75 mm

• Capability: 0.75 mm
• Recommendation: 1.5 mm

• Capability: 0.030“
• Recommendation: 0.060“

Minimal wall thickness (Unsupported)

1 mm

• Capability: 1 mm
• Recommendation: 1.5 mm

• Capability: 0.040“
• Recommendation: 0.060“

Maximum Wall Thickness

–

Minimum Gap Between Walls

0.50 mm

• Capability: 0.5 mm
• Recommendation: 1 mm

• Capability: 0.020“
• Recommendation: 0.040“

Minimum Hole Diameter at 1mm Thickness

1 mm

Capability: 1 mm

Capability: 0.040“

Minimum Shaft Diameter at 1mm Height

1.2 mm

• Capability: 1.2 mm
• Recommended: 1.5 mm or greater

• Capability: 0.047″
• Recommended: 0.060″

Minimum Embossed Text Height

0.50 mm

Embossed text shallower than 0.50 mm may be unclear.

Embossed text shallower than 0.02” may be unclear.

Minimum Debossed Text Depth

0.5 mm

Debossed text shallower than 0.5 mm may be unclear.

Debossed text shallower than 0.02” may be unclear.

Minimum Font Size (Character Height)

3.5 mm

• Capability: 3.5 mm
• Recommendation: 5 mm

• Capability: 0.138″
• Recommended: 0.197″

Requires Support Structures

Yes

Horizontal Bridges, Maximum Unsupported Length

10 mm

Maximum Unsupported Overhang Size

2 mm

Overhangs longer than 5 mm should be supported even if their width is less than 2 mm

Overhangs longer than 0.197″ should be supported even if their width is less than 0.079″

Unsupported Angle from Vertical

45°

Minimum Clearance for Moving Parts

0.5 mm

Clearances smaller than 0.5 mm may result in fused parts.

Clearances smaller than 0.02 inch may result in fused parts.

Standard Layer Thickness

0.25-0.33 mm

Thickness depends on part size and material. Large format prints will have larger layer thicknesses as default.

Thickness depends on part size and material. Large format prints will have larger layer thicknesses as default.

Infill Options

Ultralight, Light, Solid