Maximum Part Size

400 × 400 × 400 mm

Minimum Part Size

3 × 2 × 1 mm

General Tolerance

0.2%

±0.2% (±0.1 – 0.2 mm)

Minimum Feature Size

0.7 mm

• Cosmetic features: 0.75 mm 
• Structural features: 1.5 mm

• Cosmetic features: 0.030″
• Structural features: 0.060″

Minimal wall thickness (Supported)

0.4 mm

• Capability: 0.4 mm
• Recommendation: 1.0 mm

• Capability: 0.016″
• Recommendation: 0.040″

Minimal wall thickness (Unsupported)

0.5 mm

• Capability: 0.5 mm
• Recommendation: 1.0 mm

• Capability: 0.020″
• Recommendation: 0.040″

Maximum Wall Thickness

7 mm

Minimum Gap Between Walls

0.4 mm

• Capability: 0.4 mm
• Recommendation: 0.75 mm

• Capability: 0.016″
• Recommendation: 0.030″

Minimum Hole Diameter at 1mm Thickness

0.5 mm

• Capability: 0.5 mm
• Recommendation: 1.0 mm

• Capability: 0.020″
• Recommendation: 0.040″

Minimum Shaft Diameter at 1mm Height

0.50 mm

• Capability: 0.5 mm
• Recommendation: 1.0 mm

• Capability: 0.020″
• Recommendation: 0.040″

Minimum Embossed Text Height

0.50 mm

Embossed text shallower than 0.5 mm may be unclear.

Embossed text shallower than 0.020” may be unclear.

Minimum Debossed Text Depth

0.50 mm

Debossed text shallower than 0.5 mm may be unclear.

Debossed text shallower than 0.020” may be unclear.

Minimum Font Size (Character Height)

1 mm

• Capability: 1.0 mm
• Recommendation: 2.0 mm

• Capability: 0.040″
• Recommendation: 0.080″

Requires Support Structures

Yes

Horizontal Bridges, Maximum Unsupported Length

2.00 mm

Maximum Unsupported Overhang Size

0.5 mm

Unsupported Angle from Vertical

45°

Minimum Clearance for Moving Parts

0.6 mm

Provide a gap of at least 0.6 mm for printed linkages to prevent sticking and allow smooth operation.

Provide a gap of at least 0.024″ for printed linkages to prevent sticking and allow smooth operation.

Standard Layer Thickness

0.02-0.08 mm

Depending on the material

Depending on the material

Infill Options

Solid