Europe 
Türkiye 
United Kingdom 
Global 
Login with my Xometry account 0.4mm text in PLA
A
Hey all, my part needs to have perforated text on a thin PLA sheet, and the text is 0.4 mm thick. Do you think that’s wide enough to print cleanly without running into issues like weak layers or gaps? Or should I bump up the thickness a bit? The text width in the Y and Z axes is 0.4 mm and it perforates a thin wall, and the perforated thin wall is the first layer.
-
-
Hey all, my part needs to have perforated text on a thin PLA sheet, and the text is 0.4 mm thick. Do you think that’s wide enough to print cleanly without running into issues like weak layers or gaps? Or should I bump up the thickness a bit? The text width in the Y and Z axes is 0.4 mm and it perforates a thin wall, and the perforated thin wall is the first layer.
-
Suggested Topics
Topic
Replies
Views
Activity
Teeth shearing off, what is the best material?
Hello, we have this small tool used to loosen/tighten a metal slotted ferrule. The teeth of the tool engage with the slots in the ends of the ferrule and torque is applied to tighten... read more
0
113
DFM check: Is this part a “nightmare” to machine?
Hi! Designing a custom housing for a prototype. I’ve got features on all six sides, and I’m realizing this is going to need a ton of CNC setups. In your experience, is it better... read more
2
817
Apr 05
Robust actuator-to-brake pedal joint for angled, high-force actuation
Hi, i am designing a push-rod connection between a linear actuator and a vehicle brake pedal for a durability test setup. The actuator can apply 750 N, and the pedal rotates through its travel,... read more
2
1.1k
Mar 16
Shrink-fitting a thin stainless sleeve into a thick steel housing
Hi! I’m working on a shrink-fit joint where a thin-walled 304 stainless sleeve is installed into a bored pocket in a much larger 4140 steel housing. The sleeve carries only light axial loads, but... read more
1
928
Dec 29
DMLS tolerances for screw holes and sealing surfaces
Hi, I’m working on a small metal housing (around 120 × 80 × 40 mm) that will be 3D printed with DMLS for a sensor module. It needs threaded M3 screw holes and a... read more
2
2.1k
Nov 25